Higher husking ratio:

•      The new, stronger support of movable shaft arm gives fail-proof parallel alignment of main shaft and movable shaft, therefore longer life to the rubber roll. The result is a much higher husking ratio.

•      Easy to replace rubber roll

•      Replacing the rubber roll is simple with the newly designed roll retainer. It needs to be easy, quick operation.

•      Pneumatic control device

•      The adjustment of rubber roll clearance and opening and closing the inlet shutter are automatically controlled by means of an air cylinder, level gauge, etc. All you need to do is check the rubber roll to see if it is worn out and should be replaced everything else is automatic.

Safety first transmission system

•      The larger class shaft and bearing, higher machining accuracy of part, efficient    transmission system by using the belts, all these guarantee safe operation of transmission system, eliminating  possible danger.

•      Minimized noise

•      Two rubber roll shafts are turned by the same belt to minimize power loss in transmission. This, together with the study main body, decreases the noise level to give quiet operation.

•      Air-jet circulation type aspirator

•      To make cooling for rubber rolls is necessary when machine operates; one blower is installed to supply air for them without motor.

•      Easy operation

•      A large inspection window facilitates checking of aspiration. A sampling outlet at each discharge outlets you check separating performance and control valve

CLICK TO DOWNLOAD PDF